Instructions.

How to Use Your Pop Socket.

Magnetic Ring:

💛🐭 Clean your phone/kindle case
Use a gentle cleaner to remove oils and dust from the surface.

💛🐭 Dry the area fully
Give the back of your case a quick wipe with a dry cloth so the adhesive can grip properly.

💛🐭 Choose your pop‑socket position
Hold your phone/kindle naturally and find the most comfortable spot for your fingers (usually just below the centre).

💛🐭 Applying the magnetic ring;

• Peel off the adhesive backing.

• Place the ring in your chosen area.

• Press firmly for 30–60 seconds.

💛🐭 Attaching your pop socket;

• Peel the backing off the pop socket if one is attached. For clear pops, this is usually a blue protection.

• Line it up with the centre of the magnetic ring.

• Press firmly for 30–60 seconds.

💛🐭 Let it set;

Avoid pulling or twisting the pop socket for 1–2 hours (overnight is best) so the adhesive bonds fully.

💛🐭 Snap onto magnetic mounts;

Your phone is now ready to use with other compatible magnetic holders and stands.

Sticky Back:

💛🐭 Clean your phone/kindle case
Use a gentle cleaner to remove oils and dust from the surface.

💛🐭 Dry the area fully
Give the back of your case a quick wipe with a dry cloth so the adhesive can grip properly.

💛🐭 Choose your pop‑socket position
Hold your phone/kindle naturally and find the most comfortable spot for your fingers (usually just below the centre).

💛🐭 Applying your pop socket
• Peel off the adhesive backing.
• Line up the pop socket in your chosen position.
• Press down firmly for 30–60 seconds.

💛🐭 Let it set
Avoid pulling, popping, or twisting the pop socket for 1–2 hours (overnight is best) so the adhesive bonds fully.

💛🐭 Ready to use
Once set, your pop socket is secure and ready for comfy holding, propping, and scrolling.